Proffie Lightsaber Operation Manual

Video Tutorial:

Proffie Customization Tutorial: How to add sound fonts and blade styles to the Proffie lightsaber

 

One Button Sabers

SABER OFF

Power on: Hold the button until it illuminates.

BLADE OFF

Ignition:

  1. Tap the button, or
  2. Twist the saber (if enabled), or
  3. Thrust forward (if enabled), or
  4. Swing the saber (if enabled)

Muted ignition: Double tap the button and hold.

Enter/Exit Volume Menu: Hold the button and clash the saber.

Increase Volume: Tap the button while in menu.

Decrease Volume: Hold and release the button while in menu.

Next Preset: Hold and release the button (~1 second).

Previous Preset: Hold the button.

Play/Stop Music: Double tap the button.

Check Battery Level: Triple tap the button.

Power off: Hold the button until the light turns off.

BLADE ON

Retraction:

  1. Hold the button until it begins retracting, or
  2. Twist clockwise (if enabled), or
  3. Pull backwards (if enabled)

Smooth Swing: Move the hilt around

Spin: Spin or move the hilt quickly

Blaster Block: Tap the activation button

Flash on Clash: Hit the saber/blade

Lock Up: Hold the button and clash the hilt

Force Effect: Angle the hilt upwards, hold the button and twist.

Stab: Thrust forward into a clash

Melt Effect: Hold the button, thrust forward into a clash.

Drag Effect: Angle the hilt down, hold the button and clash.

Change Colour:

  1. Angle the hilt downwards Hold the activation button and twist, or
  2. Hold the button for 2 flashes (~1 second)

Enter/Exit Battle Mode: Triple click the button and hold.

Enter Multi-Block Mode: Swing and hold the button for 1 second, then release

Exit Multi-Block Mode: Tap the button

Enter Colour Change Mode: Angle the hilt downwards, hold the button and twist.

Confirm Colour: Hold the button until audio confirmation

Two Button Sabers

  • When buttons are oriented up and down: Upper button is Main button, lower button is AUX button.
  • When the buttons are oriented left and right: Left button is Main button, right button is AUX button.

Power on: Hold the activation button until it illuminates.

BLADE OFF

Blade length Toggle: Press the power button 6 times to toggle between 82 and 92cm blade lengths.

Ignition:

  1. Tap the Main button, or
  2. Twist the saber

Muted ignition: Double tap the button and hold.

Next Preset: Tap the Aux button (hilt level or angled upwards)

Previous Preset: Tap the Aux button (hilt angled downwards)

Power Off: Press the Aux button 3 times.

Adjust Volume: Long press the Aux button for 2 seconds until you hear a "beep" to enter volume mode.
Press the Main button to increase, Aux button to decrease.
Long press the auxiliary button again to exit.

BLADE ON

Retraction:

  1. Tap the Main button, or
  2. Twist the saber

Smooth Swing: Move the hilt around

Blaster Block: Tap the Aux button

Lockup: Hold the Aux button and clash the saber

Flash on Clash: Hit the saber/blade

Drag Effect: Hold the Aux button and then stab downwards.

Stab Effect: Forward thrust clash

Melt Effect: Hold any button and thrust forward into a forward clash

Lightning Block: Hold the Main button and tap the Aux.

Force Effect: Hold the Main button and release (~1s)

Change Colour: Hold the Aux button and tap the Main button. Slowly rotate the lightsaber to change the blade colour. Tap the Main button to select.

Play/Stop Music: Long press the Main button

Enter Multi-Block Mode: Hold the Aux button for ~1 second, then release. Swing to trigger blaster blocks.

Exit Multi-Block Mode: Any button press or a clash/stab etc

Enter/Exit Battle Mode: Hold the Aux button and swing

Power off: Tap the Main button