Single button

Double button

 

1.Power on and off (make sure it is charged first)
• To wake up from deep sleep mode, press and hold the button for 3 seconds.
• To turn off, press and hold the button for 4 seconds.
• To put the saber into deep sleep mode, press and hold the button for 8 seconds.
• To turn on the saber, press the button for 1 second.
2. Change blade color (saber must be turned on)
• Press the button for 2 seconds and release your finger. Click the button to
change the color.
3. Lightsaber Effects (Sword must be on)
• Blaster Sound: Tap the button.
• Lock Loop: Press the button for 1 second and release your finger. Then press
the
button to activate the lock. Press the button again to end the lock loop.
• Flash-on-Clash: The saber automatically flashes white and makes a sound
when it hits
another surface.
4. Sound Effects (Lightsaber should be off)
• Change sound fonts: Press the button for 2 seconds to change the sound font.
Repeatto cycle through the soundfonts.
• Adjust volume: Press the button for 1 second to adjust the volume.
5. Breathing light when charging
• When charging, the button has a breathing light effect.
6. Creating a double-bladed saber
• Make sure you have two saber hilts of the same style. Unscrew the bottom of one of the handles. Screw in the other handle firmly.
• To release, unscrew the other handle and refit the lower one. But you need to buy a connector
7. Adding and removing the blade
• Use the tools provided to loosen the screws in the handle.