1. EXIT STANDBY MODE:
Press and hold the power button for 3 to 10 seconds to wake up from standby mode. Music will play, and the power button will activate. If you don't take any action, the sword will automatically return to standby mode.
2. POWER ON AND POWER OFF:
To turn on the saber, press the button once; to turn it off, press and hold it for at least 10 seconds.
3. WHEN THE LIGHTSABER IS TURNED ON:
Press the button once to produce a "clash" sound. Press and hold the button for 1 second. The ignition button will flash once. Release the button.
Immediately press the button once to activate the "Clash" lock.
Press again to turn off the lock.
(Clash Technology): The lightsaber automatically flashes white and makes a sound when it touches the opponent's sword.
4. COLOR SELECTION (LIGHTSABER ON):
Press and hold the button for 2 seconds. The ignition button will flash twice, then release.
To change color, hold the button again until you reach the color you want, then release the button.
Press the button again to confirm and save your color.
5. BACKGROUND SOUND SELECTION AND VOLUME CONTROL (LIGHTSABER OFF):
To change the sound font:
Hold the button for 2 seconds when the lightsaber is off until you hear a confirmation tone. Repeat this process as many times as necessary to cycle through the different tones (3 or 6 depending on the model). Each font has a different confirmation tone and blade effect (solid or flickering/unstable).
To set the sound:
Hold the button down for 1 second when the lightsaber is off, then release.
The sound changes from "Loud sound" to "Soft sound."
Repeat the process to enable silent mode.
Mute or silence mode is confirmed by a mute, mute, or something else tone depending on the saber purchased.
6. BATTERY AND CHARGING:
To charge your lightsaber, connect the included USB cable to a 220V > 5V 1A/5A transformer (such as a cell phone charger) and connect the other end of the cable to the lightsaber in the appropriate location.
The ignition button will illuminate until the battery is fully charged and then turn off.
For accelerated charging, we recommend a charger with at least 2 A.
Charging time approx. 4 hours.
The battery is a 18650 3.7V lithium-ion battery. It is accessed by unscrewing the main body at the bottom of the saber. For safety information, see Chapter 8, Warning.
Resistant to athletic combat with the lightsaber against equal blades.
Clash effect technology for ultra-realistic lightsaber duels
Built-in speaker with up to 6 different sound fonts! Silent mode is available.
3 lighting effects (fixed light / flickering light / strong flickering light).
Detachable blade - use the included Allen key to tighten the screws on top of the handle.
Led RGB: Choose your favorite blade color from the available colors!
18650 3.7V 2000mah battery
Connection of two swords possible via a coupler
This sports lightsaber is not suitable for children under 8 years old.
Children's use of a lightsaber should be done under adult supervision.
Use it safely and responsibly.
⚠ The battery of the saber is a lithium-ion battery; precautions should be taken for your safety. The battery user agrees to assume the risks and responsibilities of using the battery. Since the manufacturer and the distributor cannot control the correct use of the battery (charging, discharging, storage, etc.), they cannot be held responsible for any damage to persons or property.
Please check the positive and negative of the battery before inserting it into the battery case, and fully charge the sword before powering it on.
Do not immerse the battery in water, seawater, or soda liquids.
Do not use unapproved chargers to charge the battery.
Do not attempt any repairs or battery replacement without first contacting us. Otherwise, we will not accept the sword.
Do not charge the battery near a heat source.
Do not use a battery that shows signs of damage or deformation.
Do not disassemble the battery.
Do not solder objects directly to the battery.
Avoid bumping, hitting, piercing, or crushing the battery.
Keep away from children.