S-RGB Lightsaber Operation Manual

1. One Button Operations
2. Two Button Operations

One Button Operations

Power on: Hold the activation button until it illuminates.

BLADE OFF

Ignition:

1. Press the activation button, or
2. Twist clockwise (if enabled), or
3. Thrust forward (if enabled), or
4. Swing the saber (if enabled)

Adjust Volume: Hold the button until it flashes once.

Next Font:

1. Hold the button until it flashes 2 times, or
2. Angle the hilt upwards, hold the button and twist the hilt.

Switch Blade Effects: Hold the button for 3

Play Music:

1. Hold the button until the light flashes 3 times, or
2. Angle the hilt downwards, hold the button and twist the hilt.

Power off: Hold the button for 5 seconds.

BLADE ON

Retraction:

1. Hold the activation button until it flashes 4 times, or
2. Twist clockwise (if enabled), or
3. Pull backwards (if enabled)

Smooth Swing: Move the hilt around.

Spin: Spin or move the hilt quickly.

Change Blade Effect: Angle the hilt upwards, hold the button and twist the hilt.

Blaster Block: Tap the button.

Flash on Clash on/off: Hold the button until it flashes 3 times.

Flash on Clash: Hit the saber/blade.

Lock Up: Hold the button until it flashes 1 time, release then tap the button again to activate. Hold the button again to exit.

Change Colour: Angle the hilt downwards, hold the activation button and twist the hilt, or

1. Hold the button for 2 flashes and release to enter colour change mode.
2. Tap the button to change colours.
3. Hold the button for 1 flash to select the colour.

Two Button Operation

Power on: Hold the activation button until it illuminates.

BLADE OFF

Ignition:

1. Press the main button, or
2. Twist clockwise (if enabled), or
3. Thrust forward (if enabled), or
4. Swing the saber (if enabled)

Adjust Volume: Hold the main button, then release.

Next Font:
Tap the Aux button, or
Angle the hilt downwards, hold the Aux button and twist the hilt.

Play Music:
Hold the button until the light flashes 3 times, or
Angle the hilt downwards, hold the Aux button and twist the hilt.

Flash on Clash on/off: Hold the main button then release.

Motion Controls on/off: Hold the button until it flashes 5 times.

Power off: Hold the button until the light turns off or wait 20 minutes.

BLADE ON

Retraction:

1. Tap the main button, or
2. Twist clockwise (if enabled), or
3. Pull backwards (if enabled)

Smooth Swing: Move the hilt around.

Spin: Spin or move the hilt quickly.

Change Blade Effect: Angle the hilt upwards, hold the Aux button and twist the hilt.

Blaster Block: Tap the Aux button.

Flash on Clash: Hit the saber/blade.

Lock Up: Hold the button until it flashes 1 time, release then tap the button again to activate. Hold the button again to exit.

Change Colour: Angle the hilt downwards, hold the Aux button and twist the hilt.