S-RGB Tutorial
S-RGB Lightsaber Operation Manual
Quick Guide:
1. One Button Operations
Video Tutorial
1.1 Button Operation When Blade Is OFF
Status: Standby Mode / Blade OFF
- Enter Standby Mode: Hold the button until the button light turns on.
- Turn Blade ON: Tap the button after entering standby mode.
- Adjust Volume: Hold the button for 1 second, then release.
- Switch Sound Font: Hold the button for 2 seconds, then release.
- Switch Blade Effects: Hold the button for 3 seconds, then release.
- Power Saving Mode: Hold the button until you hear “Power Off”.
Note: Power Saving Mode also activates automatically after 10 minutes of no operation.
1.2 Button Operation When Blade Is ON
- Blaster Effect: Tap the button.
- Lock-Up Effect: Hold the button for 1 second, then release.
- Switch Blade Color: Hold the button for 2 seconds, then release. Then tap the button to cycle through colors.
- FOC Toggle On/Off: Hold the button for 3 seconds, then release.
- Power Off: Hold the button for 5 seconds, then release.
1.3 Gesture Operation When Blade Is OFF
- Twist On / Off: Twist the saber after entering standby mode.
- Switch Sound Fonts: Point the blade upward, hold the button, then twist the hilt.
- Switch BGM: Point the blade downward, hold the button, then twist the hilt.
1.4 Gesture Operation When Blade Is ON
- Switch Blade Effects: Point the blade upward, hold the button, then twist the hilt.
- Switch Blade Color: Point the blade downward, hold the button, then twist the hilt.
- FOC / Flash on Clash: Hit the saber to trigger the clash effect.
- Enter Standby Mode: Twist the saber.
2. Two Button Operations
Video Tutorial
2.1 Button Operation When Blade Is OFF
Status: Standby Mode / Blade OFF
- Enter Standby Mode: Hold PWR until you hear the prompt sound “Power On”.
- Turn Blade ON: Tap PWR after entering standby mode.
- Switch Sound Fonts: Tap AUX.
- Enter / Exit Volume Adjust Mode: Hold PWR + AUX until you hear a beep, then release.
- Increase Volume: While in Volume Adjust Mode, tap PWR.
- Decrease Volume: While in Volume Adjust Mode, tap AUX.
- Switch Blade Effects: Hold AUX for 1 second until you hear a beep, then release.
- Power Off: Click AUX three times.
Note: Power Saving Mode activates automatically after 10 minutes of no operation.
2.2 Button Operation When Blade Is ON
- Blaster Effect: Tap AUX.
- Lock-Up Effect: Hold AUX, then release.
- Enter Standby Mode: Tap PWR.
2.3 Gesture Operation When Blade Is OFF
- Turn Blade ON: Twist the saber after entering standby mode.
- Switch Sound Fonts: Point the blade upward, hold AUX, then twist the saber.
- Switch BGM: Point the blade downward, hold AUX, then twist the saber.
2.4 Gesture Operation When Blade Is ON
- Switch Blade Color: Point the blade downward, hold AUX, then twist the saber.
- FOC / Flash on Clash: Hit the saber to trigger the clash effect.
- Twist On: Twist the saber when the blade is OFF.
- Twist Off: Twist the saber when the blade is ON.
Important Note: Please refer to the lightsaber’s included user manual for complete instructions, safety information, and product-specific details.
```